Switch Operration And Taping
1.Use Tweezers or ball point pen for operation.
Features
1.All materials are UL94V0 grade ,temperature rature
resistancd plastic.
2.Twin contact design to ensure stable contact.
3.Gold-plated contact to ensure low contact resistance Tin plated teminals to prevent contamination during soldering.
Material
Part Name
|
Material
|
Finished
|
Base
|
UL94V0(PPS)
|
Black
|
Cover
|
UL94V0(PPS)
|
Black
|
Actuator
|
UL94V0(PA46)
|
White
|
Movable
|
Copper Alloy
|
Gold/Tin
|
Tetminal Contact
|
Brass
|
Gold/Tin
|
Terminal
|
Brass
|
Gold/Tin
|
Ratings
Contact Rating
|
Switching
|
25mA at 24VDC
|
Contact Resistance
|
Non-Switching
|
100mA at 50VDC
|
lnital
|
50mΩ Max.
|
Contact Resistance
|
After life
|
100mΩ Max.
|
lnsulation Resistance
|
100mΩ Min.60sec at 500VDC
|
Dlelectric Strength
|
500V DC for 60seconds
|
Switch Capacitance
|
5pF Max.at 1M Hz
|
Operation Temperature
|
-40℃ ~+85℃
|
Storage Temperature
|
-40℃ ~+85℃
|
Mechanical & Processing
|
Operation Force
|
1000gf Max.
|
Mechanical Life
|
3000 cycles operations
|
Resistance to Soldering
|
260±5℃ for 3-5 seconds
|
Electrical Life
|
2000 cycles 25mA 24VDC
|
Order informati
Dimensions(unit:mm)
Gold/Gold Platedg Type P/N
|
Dimensions mm(inch)
|
Quantity per Tube
|
A
|
B
|
UTH- HL04GBKT
|
11.64(0.46)
|
7.62(0.3)
|
43
|
UTH- HL05GBKT
|
14.18(0.56)
|
10.16(0.4)
|
35
|
UTH- HL06GBKT
|
16.72(0.66)
|
12.70(0.50)
|
30
|
UTH- HL08GBKT
|
21.80(0.86)
|
17.78(0.7)
|
23
|
UTH- HL09GBKT
|
24.34(0.96)
|
20.32(0.8)
|
20
|
UTH- HL10GBKT
|
26.88(1.06)
|
22.86(0.9)
|
18
|
Environmental test
Cold Resistance Test
|
Switches under temperature at-40℃ ±2℃ for 96 hours
|
Dry Heat Resistance Test
|
Switches under temperature at 85℃ ±2℃ for 96 hours
|
Humidity Test
|
Per MIL-STD-202F, Method 103B,Test Condition B
|
There shallbe on evidence of corrosion and the insulation resistance shall be no less than100 megaohms
|
Vibration Test
|
Per MIL-STD-202F, Method 204D,Test Condition A
|
there shall be no opening of closed contacts or closing of open contacts in excess of 10 micoseconds
|
Shock Test
|
Per MIL-STD-202F, Method 213B,Test Condition A
|
There shall be no opening of closed contacts or closing of open contacts in excess iof 10mincrosedconds
|
Thermal Shock Test
|
Per MIL-STD-202F, Method 107G,Test Condition A
|
There shall be no evidence of physical damage of permanent change in electrical characteristics
|
Salt-spray Test
|
Per MIL-STD-202F, Method 101D,Test Condition B
|
There are under 35±2℃ in temperature and 5±1% salt-water concentration for 48±1hour
|
Dragram